General characteristics

Brand
Schwarzmüller
Type
RH125
First registration year
Nieuw
Tire size
385/65 R22.5
Number of tires
6
Number of axles
3
Suspension
Air suspension
Construction
Versus sliding roof,can be moved from rear to front, operated from the ground
Headboard
Aluminum profiel ca. 2.400 mm high, reinforced by two stakes in the center, innenside protected with a steel plate of 650 mm galvanized
Rear doors
Aluminum double doors with each internal rotary rod locks.

Dimensions

King pin height
1.150 mm
Loadfloor height front empty
1.280 mm
Loadfloor height rear empty
1.210 mm
Turning radius front
2.040 mm
Turning radius rear
1.900 mm
Axle distance
1.310 mm
Wheelbase
7.620 mm
Loadfloor width
2.550 mm
Suspension stroke
200 mm
Min loadfloor length
13.620 mm
Max loadfloor length
13.620 mm
Min total length
13.620 mm
Max total length
13.675 mm

Construction

Loading width rear
2.480 mm
Load space internal height, front
2.695 mm
Load space internal height, rear
2.745 mm
Loading height rear
2.635 mm
Side loading height below guide rail, rear
2.635 mm
Side loading height below guide rail, front
2.585 mm
Width between side boards
2.480 mm
Internal width between guide rails
2.430 mm
Loadfloor internal length
13.620 mm

Weights

Max fifth wheel load
12.000 kg
Max axle bogie
3x 9.000 kg
Deadweight
5.800 kg
GVW
39.000 kg
Payload (80 km/h)
33.200 kg

Accessories

Country Adaption / Permit
1x Test connections on the side in the frame for brake and air suspension # In Belgium, Luxembourg, the Netherlands, in accordance with statutory regulations
Gooseneck Design & Option
1x Front wall protection on the inside made of 9 mm resin-coated panel, approx. 650 mm high
Storage
1x Sealed steel pallet box for 32 Euro pallets (long/low version), with partition in centre, cover on both sides to open upwards
2x Slat bracket for 16 clip-in slats, one-sided
1x Plastic toolbox 600 x 415 x 460 mm (W x H x D, exterior) # Internal dimensions: 520x340x450 mm (WxHxD)
Body Construction
24x Aluminium pointed slats, 100 mm
1x Tarpaulin fastening with 20 direct turnbuckles, without belt; Without tarpaulin rope, without retaining bar on the front wall
1x Tarpaulin adjustment with conical internal height # not with freely fixable centre posts or additional post pockets
1x Load space internal height: approx. 2,685 mm
1x Rear aluminium wear-resistant plate 3/5 mm, approx. 300 mm, flush with floor
Axle Bogie
1x Axle lift on 1st axle, raised or lowered automatically depending on the weight,forced lowering and speed-restricted moving-off aidbutton operation in the cab and actuation via "3 x brakes" # With a raised 1st axle, the vehicle does not drive in statu
Wheels
6x Steel wheel rims 11.75 x 22.5, rim offset 120 mm, silver
Accessoires, Loose
6x Tyres 385/55 R 22.5, 160K, manufacturer after factory selection
Request an offer
This product is viewed very often

Igmar Nooteboom

Managing director

H.J. Mitchell

Jonmoore International
★★★★★

Great brand, top quality. We have RINO® flatbeds, drop deck and lowbeds in our fleet traveling all over West Africa in some most difficult terrain and still stand up tall today! Igmar and team, keep going strong!

C. Delor

Goudalle - Concept Bois d'Opale
★★★★★

Le service des ateliers de Nooteboom Trading est très efficace et disponible.
Le personnel est accueillant, compétant et de bon conseil.
Nous n’hésiterons pas à refaire appel à eux si nécessaire.

Ron Heikoop

Heikoop Trucking
★★★★★

Recentelijk twee Schwarzmüller coiltrailers aangeschaft bij deze firma.
Zeer goede service en klantvriendelijkheid. Maatwerk is geen probleem.
Mijn volgende trailer zal zeker weer een Schwarzmüller zijn en bij deze firma aangeschaft worden, omdat ook de prijs-kwaliteitsverhouding optimaal is.

M. Grootenboer

Arcticcat
★★★★★

Bedankt voor jullie perfecte service.
En op naar de volgende Schwarzmüller oplegger.

Ik snap niet waarom bedrijven kiezen voor de bekende Duitse merken. Als je 1 keer met een Schwarzmüller hebt gewerkt, wil je niet anders meer.

Top opleggers !!

Share: 

Request an offer

  • This field is for validation purposes and should be left unchanged.