General characteristics

First registration year
Tire size
435/50 R19.5
Number of tires
Number of axles
Air suspension
Versus sliding roof,can be moved from rear to front, operated from the ground
Rear doors
Aluminum double doors with each internal rotary rod locks.


King pin height
960 mm
Loadfloor height front empty
1.040 mm
Loadfloor height rear empty
1.040 mm
Turning radius front
2.040 mm
Turning radius rear
1.900 mm
Axle distance
1.310 mm
7.620 mm
Loadfloor width
2.550 mm
Suspension stroke
250 mm
Min loadfloor length
13.620 mm
Max loadfloor length
13.620 mm
Min total length
13.620 mm
Max total length
13.800 mm


Loading width rear
2.480 mm
Load space height adjustable, rear
3.005 mm
Load space internal height, front
2.945 mm
Load space height adjustable, front
3.005 mm
Load space internal height, rear
2.945 mm
Loading height rear
2.760 mm
Side loading height below guide rail, rear
2.790 mm
Side loading height below guide rail, front
2.790 mm
Internal width between guide rails
2.490 mm
Loadfloor internal length
13.620 mm


Max fifth wheel load
12.000 kg
Max axle bogie
3x 9.000 kg
6.600 kg
39.000 kg
Payload (80 km/h)
32.400 kg


Coil recess with useful length of 7.400 mm, for coil diameters 900-2.100 mm
Pairs of stake pockets at both sides of coil recess, 1x at front, 1x appr. 1.840 mm (before centre of gravity), 1x 2.520 mm, 1x 3.680 mm, 1x 5.330 mm
11 pairs of recessed 2.5 t lashing points, and 5 pairs of 4 t lashing points in the body area on the external frame
Axle load display via EBS Canbus signal for display in the cab
Plastic toolbox 600 x 415 x 460 mm (W x H x D)
3 Pair Single wheel plastic mudguard, with spray protection,
Aluminium air tank
4 item(s) Steel tubular retaining posts 80 x 80 x 5 mm useful heigth approx 1,700 mm, hot dip galvanised without seuring of posts
PVC curtains, appr. 880 g/m2, with horizontal and vertical reinforcements, load securing certificate code XL. Curtains provide sealing of the lashing holes in the side raves
3 pairs of centre posts, movable across entire length, fastened in pockets
4 rows of slat pockets
Segregation of rows of slat pockets from floor: 1st row from bottom to 450 mm, 2nd row from 600 mm. 3rd row from 1,150 mm, 4th row from 1,700 mm
3 rows (24 items) Aluminium pointed slats, 100 mm
Aramid-reinforced plastic roof tarpaulin, translucent
Side reflective contour marking strips in white, at bottom along entire lengt and at top on 2 corners, in accordance with ECE 48
Rear reflective contour marking strips in red, full contour marking all around, in accordance with ECE 48
Tarpaulin fastening wit 20 overcentre tensioners with flat hook/belt at each side
Load space internal height: 1 x 60 mm height adjustable
Manually operated hydraulic lifting roof on both sides, 400 mm elevation, with lever operation on corner posts, for loading and unloading (portal doors must be opened)
Request an offer
7 offer requests have been submitted over the last 7 days

Igmar Nooteboom

Managing director

C. Delor

Goudalle - Concept Bois d'Opale

Le service des ateliers de Nooteboom Trading est très efficace et disponible.
Le personnel est accueillant, compétant et de bon conseil.
Nous n’hésiterons pas à refaire appel à eux si nécessaire.

Ron Heikoop

Heikoop Trucking

Recentelijk twee Schwarzmüller coiltrailers aangeschaft bij deze firma.
Zeer goede service en klantvriendelijkheid. Maatwerk is geen probleem.
Mijn volgende trailer zal zeker weer een Schwarzmüller zijn en bij deze firma aangeschaft worden, omdat ook de prijs-kwaliteitsverhouding optimaal is.

M grootenboer


Bedankt voor jullie perfecte service .
En op naar de volgende Schwarzmüller oplegger .

Ik snap niet waarom bedrijven kiezen voor de bekende Duitse merken , als je 1 keer met een Schwarzmüller hebt gewerkt wil je niet anders meer.

Top opleggers !!


Request an offer

  • This field is for validation purposes and should be left unchanged.